manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 151 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 151

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

151

7. 

In the 

VLAN ID

 field, specify the VLAN identifier for the new VLAN.

The range of the VLAN ID can be from 2 to 4093, excluding 4088 and 4089. (The default 
VLANs are 1, 4088, and 4089).

8. 

In the 

VLAN Name

 field, specify a name for the VLAN.

The VLAN name can be up to 32 alphanumeric characters long, including blanks. You 
cannot change the names of the default VLANs (that is, the VLANs with ID 1, 4088, and 
4089).

9. 

The 

VLAN Type

 field displays the type of the VLAN that you are configuring. 

You cannot change the type of the default VLANs (that is, the VLANs with ID 1, 4088 and 
4089). When you create a VLAN using this page, its type is always static. A VLAN that is 
created by the Generic VLAN Registration Protocol (GVRP) initially uses a type of 
dynamic. You can change the type of a dynamic VLAN to static.

10. 

Click the 

Add

 button.

The VLAN is added to the switch.

Delete a VLAN

To delete a VLAN from the switch:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments