8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Get Started
User Manual
45
Many of the pages that allow you to configure or view interface settings include links to
display all ports, all LAGs, or all ports and LAGs on the page.
Use these links as follows:
•
To display all ports, click the
1
link.
•
To display all LAGs, click the
LAG
link.
•
To display all ports and LAGs, click the
All
link.
The procedures in this section describe how to select the ports and LAGs to configure. The
procedures assume that you are already logged in to the switch. If you do not know how to
log in to the switch, see
Access the switch on-network and connected to the Internet on
Access the switch off-network on page
.
To configure a single port by using the Go To Interface field:
1.
Ensure that the page is displaying all ports, and not only the LAGs.
2.
In the
Go To Interface
field, type the port number.
For example, type
g4
.
For more information, see
7, Naming conventions for interfaces on page
3.
Click the
Go
button.
The check box associated with the interface is selected, the row for the selected interface
is highlighted, and the interface number displays in the heading row.
4.
Configure the desired settings.
5.
Click the
Apply
button.
Your settings are saved.
To configure a single LAG by using the Go To Interface field:
1.
Click the
LAG
link or the
All
link to display the LAGs.
2.
In the
Go To Interface
field, type the LAG number, for example l3.
For information, see
7, Naming conventions for interfaces on page
3.
Click the
Go
button.
The check box associated with the interface is selected, the row for the selected interface
is highlighted, and the interface number appears in the heading row.
4.
Configure the desired settings.
5.
Click the
Apply
button.
Your settings are saved.
To configure a single port:
1.
Ensure that the page is displaying all ports, and not only the LAGs.
2.
Select the check box next to the port number.