manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 130 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 130

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

130

If the database is stored on a remote server, specify the following information:

-

Remote IP Address

. Specify the IP address of the TFTP server.

-

Remote File Name

. Specify the file name of the DHCP snooping bindings 

database in which the bindings are stored.

8. 

In the 

Write Delay

 field, specify the time that the switch must wait after writing binding 

information to persistent storage.

The delay allows the switch to collect as many entries as possible (new and removed) 
before writing them to the persistent file. You can specify from 15 to 86400 seconds. By 
default, the delay is 300 seconds. 

9. 

Click the 

Apply

 button.

Your settings are saved.

View or clear DHCP snooping statistics

You can view and clear per-interface statistics about the DHCP messages filtered by the 
DHCP snooping feature on untrusted interfaces. 

To view or clear the DHCP snooping statistics:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments