manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 246 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 246

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Routing 

User Manual

246

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Routing

> VLAN > VLAN Routing Configuration

.

7. 

From the 

VLAN

 menu, select the VLAN.

This menu displays the IDs of all VLANs that are configured on the switch, that is, regular 
VLANs and routing VLANs.

8. 

In the 

IP Address

 field, enter the IP address that to be assigned to the VLAN routing 

interface.

9. 

In the 

Subnet Mask

 field, enter the subnet mask to be assigned to the VLAN routing 

interface.

10. 

Do one of the following:

•

New routing VLAN interface

. If you configure a regular VLAN as a new VLAN 

routing interface, click the 

Add

 button.

The VLAN routing interface is added for the selected VLAN ID. The entry in the MAC 

Address field is automatically entered.

•

Changed routing VLAN

 interface. If you change an existing routing VLAN interface, 

click the 

Apply

 button.

You changes are saved.

The following table describes the nonconfigurable information displayed on the page.

Table 52.  VLAN Routing Configuration information

 

Field

Description

Port

The interface that is assigned to the VLAN for routing.

MAC Address

The MAC address that is assigned to the VLAN routing interface.

Routing Mode

Indicates whether routing is enabled for the VLAN routing Interface.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments