manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 355 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 355

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

355

•

Max Static MAC Address

. Specify the maximum number of statically locked MAC 

addresses on the selected interfaces. The default is 48.

•

Enable Violation Shutdown

. Enable or disable shutdown of the selected interfaces if 

a packet with a disallowed MAC address is received. The default value is No, which 
means that the option is disabled.

•

Enable Violation Traps

. Enable or disable the sending of new violation traps if a 

packet with a disallowed MAC address is received. The default value is No, which 
means that the option is disabled.

10. 

Click the 

Apply

 button.

Your settings are saved.

Your settings are saved.

View learned MAC addresses and convert them to static MAC addresses

After you enabled port security globally (see 

Configure the global port security mode on 

page

 

352

) and enabled port security for specific interfaces (see 

Configure a port security 

interface on page

 

353

), you can convert a dynamically learned MAC address to a statically 

locked address. 

To view learned MAC addresses for an individual interface or LAG and convert these 
MAC addresses to static MAC addresses:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments