Home
/
NETGEAR
/
GS108Tv3
/
User Manual

NETGEAR GS108Tv3, User Manual, Page: 124 / 492

Share

Page: 124 / 492

NETGEAR GS108Tv3 User Manual Download Page 124

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Configure System Information

User Manual

124

7.

Select the DHCP Snooping Mode

Enable

radio button.

The default is Disable.

8.

To enable the verification of the sender’s MAC address for DHCP snooping, leave the MAC

Address Validation

Enable

radio button selected.

The default is Enable.

When MAC address validation is enabled, the device checks packets that are received on
an untrusted interface to verify that the MAC address and the DHCP client hardware
address match. If the addresses do not match, the device drops the packet.

9.

Click the

Apply

button.

Your settings are saved.

Enable DHCP for all member interfaces of a VLAN

To enable DHCP snooping for all member interfaces of a VLAN:

1.

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.

2.

Launch a web browser.

3.

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page

Access the switch off-network on page

The login page displays.

If the NETGEAR Business page displays, see

Register and access the switch with your

NETGEAR account on page

.

«
...
122
123
124
125
126
...
»

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments