8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Manage Device Security
User Manual
402
The previous figure shows the IP Binding Configuration page for model GS110TPv3.
7.
From the
ACL ID
menu, select the existing IP ACL for you which you want to add an IP ACL
interface binding.
The fixed selection from the
Direction
menu is
Inbound
, which means that IP ACL rules
are applied to traffic entering the interface.
8.
In the
Sequence Number
field, optionally specify a number to indicate the order of the
access list relative to other access lists already assigned to the interface and direction.
A low number indicates high precedence order. If a sequence number is already in use
for the interface and direction, the specified access list replaces the currently attached
access list using that sequence number. If you do not specify the sequence number
(meaning that the value is 0), a sequence number that is one number greater than the
highest sequence number currently in use for the interface and direction is used. The
range is from 1 to 4294967295.
9.
To add the selected ACL to a port or LAG, in the Ports table or LAG table, click the port or
LAG so that a check mark displays.
You can add the ACL to several ports and LAGs.
The Ports and LAG tables display the available interfaces for ACL bindings. All
nonrouting physical interfaces, VLAN interfaces, and interfaces participating in LAGs are
listed.
10.
Click the
Apply
button.
Your settings are saved.