manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 184 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 184

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

184

10. 

From the 

Fast Link

 menu, select whether the specified port is an edge port within the CST.

The option is 

Enable

 or 

Disable

. The default value is Disable.

11. 

From the 

BPDU Forwarding

 menu, configure BPDU forwarding.

The option is 

Enable

 or 

Disable

. The default value is Disable. When BPDU forwarding is 

enabled, the switch forwards the BPDU traffic arriving on the port when STP is disabled 
on the port.

12. 

From the 

Auto Edge

 menu, specify if the port is allowed to become an edge port if it does 

not detect BPDUs for some time.

The option is 

Enable

 or 

Disable

. The default value is Enable.

13. 

In the 

Path Cost

 field, set the path cost to a new value for the specified port in the common 

and internal spanning tree. 

Specify a value in the range from 0 to 200000000. The default is 0. When the path cost is 
set to 0, the value is updated with the external path cost from an incoming STP packet.

14. 

In the 

Priority

 field, specify the priority for a particular port within the CST. 

The port priority is set in multiples of 16. For example if you attempt to set the priority to 
any value between 0 and 15, it is set to 0. If you try to set it to any value between 16 and 
(2*16 – 1), it is set to 16, and so on. The range is 0 to 240. The default value is 128.

15. 

In the 

External Port Path Cost

 field, set the external path cost to a new value for the 

specified port in the spanning tree. 

The value range is 0 to 200000000. The default is 0.

16. 

Click the 

Apply

 button. 

Your settings are saved.

17. 

To refresh the page with the latest information about the switch, click the 

Update

 button.

The following table describes the nonconfigurable information displayed on the page.

Table 35.  CST port configuration

 

Field

Description

Port State

The forwarding state of the port. The default is Disabled.

Port ID

The port identifier for the specified port within the CST. It is made up from the port 
priority and the interface number of the port.

Hello Timer

The value of the setting for the CST. The default is 2 seconds.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments