manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 348 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 348

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

348

Configure storm control settings

A broadcast storm is the result of an excessive number of broadcast messages 

simultaneously transmitted across a network by a single port. Forwarded message 
responses can overload network resources, cause the network to time out, or do both.

The switch measures the incoming packet rate per port for broadcast, multicast, unknown, 
and unicast packets and discards packets if the rate exceeds the defined value. You enable 
storm control per interface, by defining the packet type and the rate at which the packets are 
transmitted. 

Configure global storm control settings

The global storm control settings apply to all ports. After you configure the global settings, 
you can specify storm control settings for one or more ports.

To configure global storm control settings:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Security > Traffic Control > Storm Control

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments