manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 318 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 318

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

318

Manage the Smart Control Center Utility

As a security enhancement, you can disable the Smart Control Center SCC utility. By default, 

the utility is enabled and allows you to configure the switch (see 

Discover the switch in a 

network with a DHCP server using the Smart Control Center on page

 

26

 and 

Discover the 

switch in a network without a DHCP server using the Smart Control Center on page

 

27

).

To enable or disable the SCC administrative mode:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Security > Management Security > SCC Control

.

The NETGEAR Smart Control Center (SCC) Utility page displays.

7. 

Select the one of the following SCC Admin Mode radio buttons:

•

Enable

. The SCC utility can discover the switch and perform actions on the switch. 

This is the default setting.

•

Disable

. The SCC utility can discover the switch but cannot perform any actions on 

the switch. 

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments