8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Manage Device Security
User Manual
311
The login page displays.
If the NETGEAR Business page displays, see
Register and access the switch with your
4.
Enter one of the following passwords:
•
After registration, enter the local device password.
By default, the local device password is
password
.
•
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
5.
Click the
Login
button.
The System Information page displays.
6.
Select
Security > Management Security> > Server Configuration
.
7.
In the
Server
field, enter the server IP address.
8.
In the
Priority
field, specify the priority for the server.
The priority determines the order in which the servers are contacted when
attempting to authenticate a user. A value of 0 is the highest priority. The range is from
0
to 65535.
9.
In the
Port
field, specify the authentication port value for TACAS+ server sessions.
The value must be in the range from 0 to 65535. If you do not specify a value, the switch
uses the standard TCP port 49 for sessions with the server.
10.
In the
Key String
field, specify the authentication and encryption key for
communications between the device and the server.
The range is from 0 to 128. The key must match the key used on the server.
11.
In the
Connection Timeout
field, specify the time that passes before the connection
between the device and the server times out.
The range is from 1 to 30. If you do not specify a value, the switch uses a default value
of
5 seconds.
12.
Click the
Add
button.
The server is added to the switch.