Mitsubishi Electric C80 Series, Manual

Page: 652 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
635 IB-1501279-H
Set the compensation data No. at the farthest end on the positive side.
(Note) When the axis moves in negative direction with two-way pitch error compensation enabled, set com-
pensation data No. of which locates on the nearest point to positive side. The compensation point should
be set with even number.
---Setting range---
4101 to 5124
Set the scale factor for the compensation amount.
---Setting range---
0 to 99
Set the interval to divide the basic axis.
Each compensation data will be the compensation amount for each of these intervals.
---Setting range---
0.001 to 9999.999 (mm)
Select whether to enable two-way pitch error compensation.
0: Disable
1: Enable
When two-way pitch error compensation is enabled, set the compensation amount of the reference position
when the axis moves to the position from the opposite direction of the zero point return.
---Setting range---
-32768 to 32767
(Note) The actual compensation amount will be the value obtained by multiplying the setting value with the
compensation scale.
Set the compensation amount for each axis.
---Setting range---
-32768 to 32767
(Note) The actual compensation amount will be the value obtained by multiplying the setting value with the
compensation scale.
#4005 pdvno Division point number at the most positive side <n-th
axis>
#4006 sc Compensation scale factor <n-th axis>
#4007 spcdv Division interval <n-th axis>
#4008 twopc Two-way pitch error compensation <n-th axis>
#4009 refcmp Reference position compensation amount <n-th axis>
#4101-5999