Mitsubishi Electric C80 Series, Manual

Page: 481 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
464 IB-1501279-H
Select how to specify the measurement reference point coordinates for manual tool length measurement I (L
system).
0: Use the machine zero as the reference point
1: Use the coordinates of #2015 tlml- as the reference point (the same operation as when #1282 bit2 = 0
for M7)
2: Use the workpiece coordinate system offset (modal) as the reference point (the same operation as when
#1282 bit2 = 1 for M7)
[M8]
Select whether to have the monitor screen show a PLC axis position counter.
0: Monitor screen does not show a PLC axis position counter.
1: Depending on the selected counter type, monitor screen is able to show.
[M8]
Select whether to block the connection from GX Developer.
0: Allow the connection
1: Block the connection
[M8]
Select whether the 3D machine interference check outputs an alarm or not when the tool is not mounted.
0: Not output an alarm when the tool check is disabled or the tool is not mounted.
1: Output an alarm when the tool check is disabled or the tool is not mounted.
Designate the destination menu Nos. to move monitor screen's main menus.
-1 : Menu not displayed
0 : No change
1 to 30: Destination menu Nos.
Designate the destination menu Nos. to move setup screen's main menus.
-1 : Menu not displayed
0 : No change
1 to 30: Destination menu Nos.
Designate the destination menu Nos. to move edit screen's main menus.
-1 : Menu not displayed
0 : No change
1 to 30: Destination menu Nos.
Designate the destination menu Nos. to move diagn screen's main menus.
-1 : Not display the menu
0 : No change
1 to 30: Destination menu No.
(PR) #11087 Meas basic point Tool length measurement I reference point (for L sys-
tem only)
#11091 PLC counter valid Enable PLC axis counter
(PR) #11094 GX Restriction Inhibiting GX Developer connection
#11100 3D_MChk_ToolAlm Alarm when tool interference check is disabled
(PR) #11101-
11130 Monitr menu(MTB)1-30 Monitor main menu (MTB) 1 to 30
(PR) #11151-
11180 Setup menu(MTB) 1-30 Setup main menu (MTB) 1 to 30
(PR) #11201-
11230 Edit menu(MTB) 1-30 Edit main menu (MTB) 1 to 30
(PR) #11251-
11280 Diagn menu(MTB)1-30 Diagn main menu (MTB) 1 to 30