manualshive.com logo in svg

Mitsubishi Electric C80 Series, Manual

The Mitsubishi Electric C80 Series comes with a comprehensive user manual, providing you with all the necessary information to maximize your product's performance. This manual is available for free download at manualshive.com, allowing you to conveniently access the detailed instructions and get the most out of your Mitsubishi Electric C80 Series.

Share
Download
background image

  ASEAN

  CHINA

MITSUBISHI ELECTRIC ASIA PTE. LTD. (ASEAN FA CENTER)

MITSUBISHI ELECTRIC AUTOMATION (CHINA) LTD. (CHINA FA CENTER)

Singapore Service Center

China Shanghai Service Center

   307 ALEXANDRA ROAD #05-01/02 MITSUBISHI ELECTRIC BUILDING SINGAPORE 159943

   1-3,5-10,18-23/F, NO.1386 HONG QIAO ROAD, CHANG NING QU,

   TEL: +65-6473-2308 / FAX: +65-6476-7439

   SHANGHAI 200336, CHINA
   TEL: +86-21-2322-3030 / FAX: +86-21-2322-3000*8422

Philippines Service Center

         China Ningbo Service Partner

   Flexible     (Service Partner)

         China Wuxi Service Partner

   UNIT NO.411, ALABAMG CORPORATE CENTER KM 25. WEST SERVICE ROAD

         China Jinan Service Partner

   SOUTH SUPERHIGHWAY, ALABAMG MUNTINLUPA METRO MANILA, PHILIPPINES 1771

         China Hangzhou Service Partner

   TEL: +63-2-807-2416 / FAX: +63-2-807-2417

China Beijing Service Center

   9/F, OFFICE TOWER 1, HENDERSON CENTER, 18 JIANGUOMENNEI DAJIE,

  VIETNAM

   DONGCHENG DISTRICT, BEIJING 100005, CHINA
   TEL: +86-10-6518-8830 / FAX: +86-10-6518-8030

MITSUBISHI ELECTRIC VIETNAM CO.,LTD

         China Beijing Service Partner

Vietnam Ho Chi Minh Service Center

   UNIT 01-04, 10TH FLOOR, VINCOM CENTER 72 LE THANH TON STREET, DISTRICT 1, 

China Tianjin Service Center

   HO CHI MINH CITY, VIETNAM

   UNIT 2003, TIANJIN CITY TOWER, NO 35 YOUYI ROAD, HEXI DISTRICT,

   TEL: +84-8-3910 5945 / FAX: +84-8-3910 5946

   TIANJIN 300061, CHINA
   TEL: +86-22-2813-1015 / FAX: +86-22-2813-1017

Vietnam Hanoi Service Center

   6TH FLOOR, DETECH TOWER, 8 TON THAT THUYET STREET, MY DINH 2 WARD, 

China Chengdu Service Center

   NAM TU LIEM DISTRICT, HA NOI CITY, VIETNAM

   1501-1503,15F,GUANG-HUA CENTRE BUILDING-C,NO.98 NORTH GUANG HUA 3th RD,

   TEL: +84-4-3937-8075 / FAX: +84-4-3937-8076

   CHENGDU,610000,CHINA
   TEL: +86-28-8446-8030 / FAX: +86-28-8446-8630

  INDONESIA

China Shenzhen Service Center

   ROOM 2512-2516, 25/F., GREAT CHINA INTERNATIONAL EXCHANGE SQUARE, JINTIAN RD.S.,

PT. MITSUBISHI ELECTRIC INDONESIA 

   FUTIAN DISTRICT, SHENZHEN 518034, CHINA

Indonesia Service Center

　

(Cikarang)

   TEL: +86-755-2399-8272 / FAX: +86-755-8229-3686

   JL. KENARI RAYA BLOK G2-07A, DELTA SILICON 5, LIPPO CIKARANG - BEKASI 17550, INDONESIA

         China Xiamen Service Partner

   TEL:  +62-21-2961-7797 / FAX: +62-21-2961-7794

         China DongGuang Service Partner

China Dalian Service Center

  MALAYSIA

   DONGBEI 3-5, DALIAN ECONOMIC & TECHNICAL DEVELOPMENTZONE, LIAONING PROVINCE,
   116600, CHINA

MITSUBISHI ELECTRIC SALES MALAYSIA SDN. BHD.

   TEL: +86-411-8765-5951 / FAX: +86-411-8765-5952

Malaysia Service Center (Kuala Lumpur Service Center)

   LOT 11, JALAN 219, P.O BOX 1036, 46860 PETALING  JAYA, SELANGOR DARUL EHSAN.  MALAYSIA
   TEL: +60-3-7960-2628 / FAX: +60-3-7960-2629

  KOREA

    Johor Bahru Service satellite

MITSUBISHI ELECTRIC AUTOMATION KOREA CO., LTD. (KOREA FA CENTER)

Korea Service Center

  THAILAND

   8F GANGSEO HANGANG XI-TOWER A, 401 YANGCHEON-RO, GANGSEO-GU, 
   SEOUL 07528 KOREA

MITSUBISHI ELECTRIC FACTORY AUTOMATION (THAILAND) CO.,LTD

   TEL: +82-2-3660-9609 / FAX: +82-2-3664-8668

Thailand Service Center

         Korea Daegu Service Satellite

  12TH FLOOR, SV.CITY BUILDING, OFFICE TOWER 1, NO. 896/19 AND  20 RAMA 3 ROAD,
  KWAENG BANGPONGPANG, KHET YANNAWA, BANGKOK 10120,THAILAND 
   TEL: +66-2-682-6522 / FAX: +66-2-682-6020

  TAIWAN

MITSUBISHI ELECTRIC TAIWAN CO., LTD. (TAIWAN FA CENTER)

  INDIA

Taiwan Taichung Service Center

   NO.8-1, INDUSTRIAL 16TH RD., TAICHUNG INDUSTRIAL PARK, SITUN DIST., 

MITSUBISHI ELECTRIC INDIA PVT., LTD.  

   TAICHUNG CITY 40768, TAIWAN

CNC Technical Center (Bangalore)

   TEL: +886-4-2359-0688 / FAX: +886-4-2359-0689

  PLOT NO. 56, 4TH MAIN ROAD, PEENYA PHASE 3, 
  PEENYA INDUSTRIAL AREA, BANGALORE 560058, KARNATAKA, INDIA 

Taiwan Taipei Service Center

  TEL : +91-80-4655-2121  FAX : +91-80-4655-2147

  10F, NO.88, SEC.6, CHUNG-SHAN N. RD., SHI LIN DIST., TAIPEI CITY 11155, TAIWAN

     Chennai Service Satellite

   TEL: +886-2-2833-5430 / FAX: +886-2-2833-5433

     Coimbatore Service Satellite
     Hyderabad Service Satellite

Taiwan Tainan Service Center

  11F-1., NO.30, ZHONGZHENG S. ROAD, YONGKANG DISTRICT, TAINAN CITY 71067, TAIWAN

North India Service Center (Gurgaon)

   TEL: +886-6-252-5030 / FAX: +886-6-252-5031

  2ND FLOOR, TOWER A&B, DLF CYBER GREENS, DLF CYBER CITY,
  DLF PHASE-III, GURGAON- 122 002, HARYANA, INDIA 
  TEL : +91-124-4630 300  FAX :  +91-124-4630 399

  OCEANIA

     Ludhiana Satellite
     Panth Nagar Service Satellite

MITSUBISHI ELECTRIC AUSTRALIA PTY. LTD.

     Delhi Service Satellite

Oceania Service Center

     Jamshedpur Service Satellite

   348 VICTORIA ROAD, RYDALMERE, N.S.W. 2116 AUSTRALIA
   TEL:  +61-2-9684-7269/ FAX: +61-2-9684-7245

West India Service Center (Pune)

  EMERALD HOUSE, EL-3, J BLOCK, M.I.D.C., BHOSARI, PUNE - 411026, MAHARASHTRA, INDIA
  TEL : +91-20-2710 2000  FAX : +91-20-2710 2100

     Kolhapur Service Satellite
     Aurangabad Service Satellite
     Mumbai Service Satellite

West India Service Center (Ahmedabad)

  UNIT NO: B/4, 3RD FLOOR, SAFAL PROFITAIRE, PRAHALADNAGAR CORPORATE ROAD,
  PRAHALADNAGAR SATELLITE, AHMEDABAD – 380015, GUJRAT, INDIA
  TEL : +91-265-2314699 

     Rajkot Service Satellite

Summary of Contents for C80 Series













































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for C80 Series

Samson 3296 Mounting And Operating Instructions preview
3296
Brand: Samson Pages: 100
Radio Shack Remote Control Owner'S Manual preview
Remote Control
Brand: Radio Shack Pages: 3
Palfinger V Series Fitting Instructions Manual preview
V Series
Brand: Palfinger Pages: 34
Panasonic FP7 Series Additional Functions Manual preview
FP7 Series
Brand: Panasonic Pages: 45
Panasonic AFPX-COM5 Upgrade Procedure preview
AFPX-COM5
Brand: Panasonic Pages: 3
TAC Xenta 421A Configuration Instruction preview
Xenta 421A
Brand: TAC Pages: 4
VCON Escort Installation And Setup Manual preview
Escort
Brand: VCON Pages: 66
E-T-A EtherNetIP ControlPlex CPC12EN User Manual preview
EtherNetIP ControlPlex CPC12EN
Brand: E-T-A Pages: 28
Federal Signal Corporation UltraVoice Installation, Operation And Service Manual preview
UltraVoice
Brand: Federal Signal Corporation Pages: 60
FASTRON. VC-210 Installation And Operating Instructions Manual preview
VC-210
Brand: FASTRON. Pages: 16
Eaton LS Series Instruction Leaflet preview
LS Series
Brand: Eaton Pages: 2
YASKAWA U1000 iQpump Drive User Manual preview
U1000 iQpump Drive
Brand: YASKAWA Pages: 426
YASKAWA Motoman DX200 Safety Notes preview
Motoman DX200
Brand: YASKAWA Pages: 26
YASKAWA motoman NX100 Instructions Manual preview
motoman NX100
Brand: YASKAWA Pages: 210
YASKAWA Z1000 CIMR-ZU*A Series User Manual preview
Z1000 CIMR-ZU*A Series
Brand: YASKAWA Pages: 400
YASKAWA Z1000 CIMR-ZU*A Series Technical Manual preview
Z1000 CIMR-ZU*A Series
Brand: YASKAWA Pages: 466
Phytec phyCORE-MCF548x Hardware Manual preview
phyCORE-MCF548x
Brand: Phytec Pages: 104
ADTRAN Total Access 351 Series Quick Start Manual preview
Total Access 351 Series
Brand: ADTRAN Pages: 4

Brands by name

Popular brands

Load more brands