Mitsubishi Electric C80 Series, Manual

Page: 318 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
301 IB-1501279-H
Select whether to disable the setting of tool wear compensation amount.
0: Not disable
1: Disable
The wear compensation amount covers the following data according to the tool compensation type.
 Compensation type I ("1" in "#1037 cmdtyp(command type)")
... This parameter is disabled.
 Compensation type II ("2" in "#1037 cmdtyp(command type)")
... Length wear and radius wear
 Compensation type III ("3" in "#1037 cmdtyp(command type)")
... Tool wear and tool nose wear
Select whether to display confirmation message when setting workpiece coordinate system offset in [Easy
setting] menu.
0: Not display
1: Display
In creating a file, or in transferring a file, if the file name of the new file, or the file name of the transfer desti-
nation consists only of numerical figures, 0 of the file name head will be deleted from the name.
0: Designated file name (0 remains in the file name)
1: 0 will be deleted from the file name
[M8]
Set the maximum number of files to sort in the memory card, USB memory and DS lists.
If the setting is large, update of the list may take longer.
---Setting range---
64 to 1000 (M800W/M80W with Windows-based display)
64 to 250 (M800S, or M800W/M80W with Windows-less display)
64 to 128 (M80 Series and E80)
Standard: 128
[C80]
Not used.
Select whether to enable the automatic display on the Edit screen, when selected, of the programs searched
by operation/check search or the MDI programs in MDI mode.
0: Enable the automatic display
1: Disable the automatic display
Display a confirming message when operating the [Undo] menu.
0: Not display a confirming message
1: Display a confirming message
Select what to display in the selectable display area.
0: Common variable
1: Local variable
2: Workpiece coordinate system offset
3: All spindles' rotation speed
4: Expanded counters
5: Tool center coordinate display
6: Tool compensation amount
(Note1) Tool center coordinate display is available only when any of the 5-axis related options is enabled.
#8934 Disable wear comp
#8935 W COORD CONFIRM
#8936 Delete leading 0
#8937 File sort volume
#8938 Edit-Not show Prg
#8939 Undo confirm msg
#8940 Set select display