Mitsubishi Electric C80 Series, Manual

Page: 331 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
314 IB-1501279-H
[M8]
Select whether to increase the graphic check speed.
When you select 1 to 3, graphic check becomes faster.
Note however that the workpiece shape is drawn more inward than the programmed path.
The greater the setting value, the faster the graphic check will be.
0: Disable
1: Level 1
2: Level 2
3: Level 3
High-speed graphic check is enabled for the check method 1 only.
[M8]
Select whether to enable the finished shape display.
0 : Disable
1 : Enable
[C80]
Not used.
[M8]
Select the display format for simultaneous program edit (3 or 4 Edit), which can be selected with the [Display
setting] menu.
0: [2 Edit] and [3 Edit] are selectable.
1: [2 Edit] and [4 Edit] are selectable.
[M8]
Select whether to restrain the VNC client from connecting to the NC, displaying the NC screen or performing
setting to the NC.
Menu selection may be disabled depending on the set value.
0: Disable the VNC server function.
1: Enable the VNC server function, and allow the VNC client to display the NC screen and to perform set-
ting operation.
2: Enable the VNC server function, and allow the VNC client to display the NC screen, but the available
setting operation is INPUT key only.
[M8]
Specify the password for connecting to the VNC server.
The password is needed for VNC client of an external PC to connect to the server.
---Setting range---
Up to 8 alphanumeric letters
[M8]
Specify the port number for connecting to the VNC server.
The recommended value is 5901.
(Note) If you use the remote desktop function, do not set 5900.
---Setting range---
0 to 65535
#8997 Hi-speed grph chck
#8998 Finish shape view
(PR) #8999 Simul edit - View
(PR) #19701 Restrain VNCserver
#19702
VNC password
(PR) #19703 VNC server port