Mitsubishi Electric C80 Series, Manual

Page: 403 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
386 IB-1501279-H
Select the tool command value display on the monitor screen.
0: Display T-modal value of program command
1: Display Tool No. sent from PLC
Select the brightness of display unit.
1: High brightness (in bright state)
0: Medium brightness
-1: Low brightness (in dim state)
Not used. Set to "0".
Not used. Set to "0".
Set the unit name.
Set with 4 or less characters consisting of both alphabets and numbers.
If "0" is set, the unit name won't be displayed.
---Setting range---
4 or less characters consisting of both alphabets and numbers
Not used. Set to "0".
Not used. Set to "0".
Not used. Set to "0".
Not used. Set to "0".
Set the first number of M code that corresponds to the setup Nos. from 100 to 199.
---Setting range-
0 to 99999999
Set the first number of M code that corresponds to the setup Nos. from 200 to 299.
---Setting range---
0 to 99999999
Set the first number of M code that corresponds to the setup Nos. from 300 to 399.
---Setting range---
0 to 99999999
Set the first number of M code that corresponds to the setup Nos. from 400 to 499.
---Setting range---
0 to 99999999
Select whether to enable MDI setting in non-MDI mode.
0: Disable MDI setting
1: Enable MDI setting
#1130 set_t Display selected tool number
#1132 brightness
#1133 ofsmem
#1134 LCDneg
#1135 unt_nm Unit name
#1136 optype
#1137 Cntsel
#1138 Pnosel
#1139 edtype
#1140 Mn100 M code number
#1141 Mn200 M code number
#1142 Mn300 M code number
#1143 Mn400 M code number
#1144 mdlkof MDI setup lock