Mitsubishi Electric C80 Series, Manual

Page: 226 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
209 IB-1501279-H
Set the rotation angle for coordinate rotation control.
When this parameter is set, the coordinate rotation vector (#8625, #8626) will be "0".
---Setting range---
-360.000 to 360.000 (°)
Set the length to the touch tool tip.
---Setting range---
-99999.999 to 99999.999 (mm)
Set the diameter of the sphere at the touch tool tip.
---Setting range---
-99999.999 to 99999.999 (mm)
This sets the deviation amount (X direction) from the touch tool center to the spindle center.
---Setting range---
-99999.999 to 99999.999 (mm)
Set the deviation amount (Y direction) from the touch tool center to the spindle center.
---Setting range---
-99999.999 to 99999.999 (mm)
Set the one-time return distance for contacting again.
---Setting range---
0 to 99999.999 (mm)
Set the feedrate when contacting again.
---Setting range---
1 to 60000 (mm/min)
Set the difference (horizontal axis direction) between the skip read value and actual skip position.
---Setting range---
-99999.999 to 99999.999 (mm)
Set the difference (vertical axis direction) between the skip read value and actual skip position.
---Setting range---
-99999.999 to 99999.999 (mm)
Reverse the sign of external workpiece coordinate.
Select when using the external workpiece coordinate system with Z shift.
0: External workpiece offset without sign reversal
1: External workpiece offset with sign reversal
Set whether to enable external workpiece offset subtraction when setting the workpiece coordinate offset.
0: Not subtract the external workpiece offset. (Conventional specification)
1: Subtract the external workpiece offset.
#8627 Coord rot angle
#8701 Tool length
#8702 Tool Dia
#8703 OFFSET X
#8704 OFFSET Y
#8705 RETURN
#8706 FEED
#8707 Skip past amout (H)
#8708 Skip past amout (V)
#8709 EXT work sign rvs
#8710 EXT work ofs invld