Mitsubishi Electric C80 Series, Manual

Page: 735 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
718 IB-1501279-H
16.33.2 CC Link IE Field Network 2
Select the slot of the CC-Link IE field network expansion unit to which you apply the CCIEF common param-
eters #82700 to #83395.
* If you select the same slot as of "#82000 #1 Slot No.", the parameters #82000 to #82695 are applied to the
slot with higher priority.
---Setting range---
0: No setting (Disable)
1: EXT3
2: EXT4
* For M80/M800S/E80
1:EXT1
2:EXT2
Specify the station type of the CC-Link IE field network expansion unit.
---Setting range---
0: Master station
1: Local station
Specify the network No. of the CC-Link IE field network expansion unit.
---Setting range---
0 to 239
0: No setting
Specify the number of stations other than master stations.
If the NC acts as a local station, set 0 in the parameter.
 If you set a reserved station, include it in the count.
---Setting range---
0 to 64
0: No setting
Specify the station No. of the CC-Link IE field network expansion unit.
For a master station, the station No. is 0, irrespective of the parameter.
* If the NC acts as a master station, the maximum value of the station No. which can be set to the slave station
is "64". If the NC acts as a master station and also the NC is connected as a local station, set "64" or less
to the station No.
---Setting range---
0 to 120
Specify the communication mode.
0: Online mode
1: Offline mode
2: H/W test mode
Select whether to hold or clear the input data from the station where a data link error occurred.
0: Clear
1: Hold
(PR) #82700 #2 Slot No. Selection of parameter application slot
(PR) #82701 #2 Network Type Network type
(PR) #82702 #2 Network No. Network No.
#82703 #2 Total Stations Total number of slave stations
(PR) #82704 #2 Station No. Station No. (local station)
(PR) #82705 #2 Mode Communication mode
#82706 #2 DLink Fault St. Data link error station setting