Mitsubishi Electric C80 Series, Manual

Page: 728 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
711 IB-1501279-H
Specify the name of PLC device that is sent to Adapter Implicit (OUT) area. (a=1 to 6)
Example) Y
---Setting range---
Y, M, L, SB, B, SW, D, R, W
Specify the top No. of PLC device that is sent to Adapter Implicit (OUT) area. (a=1 to 6)
If you specify bit device, set it in increments of 16 points.
Example) 200
---Setting range---
Y: 0 to 5F0
M: 0 to 61424
L: 0 to 32752
SB: 0 to 7FF0
B: 0 to EFF0
SW: 0 to 7FFF
D: 0 to 32767
W: 0 to 7FFF
R: 8300 to 9799, 9800 to 9899, 18300 to 19799, 19800 to 19899, 28300 to 29799, 29800 to 29899
Specify the size (bytes) of PLC device that is sent to Adapter Implicit (OUT) area. (a=1 to 6)
Example) 1
---Setting range---
0 to 500 (bytes)
* Up to 500 bytes in total for all areas
Specify the No. of PLC project to which connection status is transferred.
---Setting range---
1 to 6
Specify the name of PLC device to which connection status is transferred.
Example) M
---Setting range---
M, L, SB, B, SW, D, R, W
Specify the top No. of PLC device to which connection status is transferred.
6 bytes of data starting from the specified device No. are occupied.
---Setting range---
M: 0 to 61424
L: 0 to 32752
SB: 0 to 7FF0
B: 0 to EFF0
SW: 0 to 7FFF
D: 0 to 32767
W: 0 to 7FFF
R: 8300 to 9799, 9800 to 9899, 18300 to 19799, 19800 to 19899, 28300 to 29799, 29800 to 29899
#81446+20(a-1) Imp A1out dev name Adapter function Implicit Message: PLC device name
(OUT)
#81447+20(a-1) Imp A1out dev No. Adapter function Implicit Message: PLC device top No.
(OUT)
#81448+20(a-1) Imp A1out dev size Adapter function Implicit Message: PLC device size
(OUT)
#81560 Imp sts Proj No. Connection status assigned PLC project No.
#81561 Impsts dev name Connection status assigned PLC device name
#81562 Imp sts dev No. Connection status assigned PLC device top No.