Mitsubishi Electric C80 Series, Manual

Page: 618 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
601 IB-1501279-H
Set the number of gear teeth on the spindle side when "the gear selection command (control input 4/bit6, 5)"
is set to "10".
---Setting range---
1 to 32767
Set the number of gear teeth on the spindle side when "the gear selection command (control input 4/bit6, 5)"
is set to "11".
---Setting range---
1 to 32767
Set the number of gear teeth on the motor side when "the gear selection command (control input 4/bit6, 5)"
is set to "00".
---Setting range---
1 to 32767
Set the number of gear teeth on the motor side when "the gear selection command (control input 4/bit6, 5)"
is set to "01".
---Setting range---
1 to 32767
Set the number of gear teeth on the motor side when "the gear selection command (control input 4/bit6, 5)"
is set to "10".
---Setting range---
1 to 32767
Set the number of gear teeth on the motor side when "the gear selection command (control input 4/bit6, 5)"
is set to "11".
---Setting range---
1 to 32767
Set the torque limit value when the torque limit (spindle control input 1/bitA, 9, 8) is set to "001" (TL3, TL2,
TL1 = 001).
---Setting range---
0 to 999 (Short-time rated %)
Set the torque limit value when the torque limit (spindle control input 1/bitA, 9, 8) is set to "010" (TL3, TL2,
TL1 = 010).
---Setting range---
0 to 999 (Short-time rated %)
Set the torque limit value when the torque limit (spindle control input 1/bitA, 9, 8) is set to "011" (TL3, TL2,
TL1 = 011).
---Setting range---
0 to 999 (Short-time rated %)
Not used.
(PR) #13059 SP059 GRA3 Spindle side gear ratio 3
(PR) #13060 SP060 GRA4 Spindle side gear ratio 4
(PR) #13061 SP061 GRB1 Motor side gear ratio 1
(PR) #13062 SP062 GRB2 Motor side gear ratio 2
(PR) #13063 SP063 GRB3 Motor side gear ratio 3
(PR) #13064 SP064 GRB4 Motor side gear ratio 4
#13065 SP065 TLM1 Torque limit 1
#13066 SP066 TLM2 Torque limit 2
#13067 SP067 TLM3 Torque limit 3
#13068 SP068