Mitsubishi Electric C80 Series, Manual

Page: 471 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
454 IB-1501279-H
[M8]
Specify a period of time during which the control does not detect a Fieldbus communication error of the Field-
bus expansion card mounted in the slot EXT4 (or EXT2 for M80/M800S/E80), after startup of the NC is com-
pleted.
Set this in 0.1-second increments.
(Note1) This parameter is enabled for all the communication expansion cards except PROFIBUS-DP com-
munication expansion card and CC-Link expansion card.
---Setting range---
0 to 60000 (0.1s)
Start or stop the Ethernet communication function.
0: Stop
1: Start
Set the main CPU's IP address.
Set the NC IP address seen from an external source.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
Set the subnet mask for the IP address.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
Set the IP address for the gateway.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
Not used. Set to "0".
Not used. Set to "0".
[M8]
Set the host's port No.
---Setting range---
1 to 9999
[C80]
Not used.
[M8]
Set the HMI side CPU's IP address.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
[C80]
Not used.
(PR) #1490 F-bus init delay 2 Field bus communication error invalid time 2
#1925 EtherNet Start of service
(PR) #1926 Global IP address IP address
(PR) #1927 Global Subnet mask Subnet mask
(PR) #1928 Global Gateway Gateway
#1929
#1930
(PR) #1931 Host number Host No.
(PR) #1934 Local IP address