Fuji Xerox Phaser 5500, Service Manual

Page: 406 / 623

6-12 Phaser 5500 Printer Service Manual
Resetting File Security Setup Values
The File Security settings are only available when the printer has a hard drive.
Resetting the File Security values resets the settings that control making files deleted
from the hard drive unrecoverable and control when old Proof and Secure Job Print
files are removed from the hard drive.
1. From the Main menu, select Printer Setup , then press the OK button.
2. Select File Security Setup , then press the OK button.
3. Select Reset File Security , then press the OK button.
4. Select Reset File Security NOW , then press the OK button.
Resetting Printer Default Settings (PostScript NVRAM)
Resetting the PostScript NVRAM restores all printer values stored in the Image
Processor Board (including network, printer setup, job defaults, and margin) to their
factory default values. The print counts and the Adobe firmware serial number are not
affected by this reset.
Caution
Before resetting the printer default settings to factory default values, make note
of the current network settings or print a Configuration Page to record the
customer’s current network settings.
You can reset the PostScript NVRAM by:
■
Using the Main menu
■
Using the Service Diagnostics menu
■
Using the Front Panel Shortcut
Using the Main Menu
1. From the Main menu, select Troubleshooting , then press the OK button.
2. Select Service Tools , then press the OK button.
3. Select Reset NVRAM , press the OK button.
4. Select Reset NVRAM and Reset Printer NOW , then press the OK button to
reset all the settings to their factory default values.