Fuji Xerox Phaser 5500, Service Manual

Page: 183 / 623

Error Messages, Codes, and Procedures 3-105
32 Test the Buffer Roller Drive.
Run the Service Diagnostics Finisher
Registration Motor CCW test.
Does the Buffer Roller rotate? Go to Step 40. Restore operation
and go to Step
33.
33 Print a Test Print.
Does the error still occur? Go to Step 40. Problem solved.
34
Check Main Drive harness connections.
Are P/J8335 and P/J8304 connected? Go to Step 36. Connect and go
to Step 35.
35 Print a Test Print.
Does the error still occur? Go to Step 36. Problem solved.
36 Check Main Drive Harness continuity.
1. Disconnect P/J8335 and P/J8304.
2. Check for continuity at the following:
J8335-1 <=> J8304-7
J8335-2 <=> J8304-8
J8335-3 <=> J8304-9
J8335-4 <=> J8304-11
J8335-5 <=> J8304-10
J8335-6 <=> J8304-13
Are these conductive?
Go to Step 37. Repair the Main
Drive Harness.
37 Check Registration Motor resistance.
Is there some amount of resistance
across P8335-2/5(COM) and P8335-1/3/
4/6? Go to Step 38. Replace the
Registration
Motor
(page 3-245).
38 Check for +24 V to the Registration Motor.
Is there +24 V across J8304-8 <=>
ground and J8304-10 <=> ground on the
Finisher Main PWB? Go to Step 39. Replace the
Finisher Main
PWB
(page 3-248).
39 Replace the Registration Motor.
Print a Test Print.
Does the error still occur? Replace the
Finisher Main
PWB
(page 3-248). Problem solved.
40 Test the Buffer Path Sensor.
Run the Service Diagnostics Buffer Path
Sensor test.
Does the sensor state change? Replace the
Finisher Main
PWB
(page 3-248). Go to Step 41.
41 Check the Buffer Path Sensor connection.
Are P/J8392 and P/J8318B connected? Go to Step 43. Connect and go
to Step 42.
42 Print a Test Print.
Does the error still occur? Go to Step 43. Problem solved.
43 Check Main Sensor Harness connections.
Are P/J8318B and P/J8302A connected? Go to Step 45. Connect and go
to Step 44.
Jam at G (Buffer Path Sensor ON) Troubleshooting Procedure (Continued)
Step Actions and Questions Yes No