Fuji Xerox Phaser 5500, Service Manual

Page: 404 / 623

6-10 Phaser 5500 Printer Service Manual
Resetting Connection Setup Values
Resetting the connection setup values resets the Printer Name, TCP/IP address, TCP/
IP address menu settings (gateway, broadcast, etc.), CentreWare IS, EtherTalk,
NetWare, set IPX frame type, IPP, and Ethernet speed to their default values.
Caution
Before resetting the connection setup values to factory default values, make note
of the current network settings or print a Configuration Page to record the
printer’s current network settings.
1.
From the Main menu, select
Printer Setup
, then press the OK button.
2.
Select
Connection Setup
, then press the OK button.
3.
Select
Reset Connection Setup
, then press the OK button.
4.
Select
Reset Connection Setup NOW
, then press the OK button.
Resetting Paper Handling Setup Values
Resetting the paper handling setup values resets the default paper source, 2-sided
printing, tray setup (default paper type/size), load paper timeout, tray sequence, tray
prompt, custom size paper units, default paper destination, job offset, output tray
switch, fuser temperature configuration, and reprint jammed pages settings.
1.
From the Main menu, select
Printer Setup
, then press the OK button.
2.
Select
Paper Handling Setup
, then press the OK button.
3. Select Reset Paper Handling Setup , then press the OK button.
4.
Select
Reset Paper Handling Setup NOW
, then press the OK button.
Resetting PostScript Setup Values
Resetting the PostScript setup values resets the PostScript Error Info, Image
Smoothing, and Edge-to-Edge Printing settings.
1.
From the Main menu, select
Printer Setup
, then press the OK button.
2.
Select
PostScript Setup
, then press the OK button.
3.
Select
Reset PostScript Setup
, then press the OK button.
4.
Select
Reset PostScript Setup NOW
, then press the OK button.