Fuji Xerox Phaser 5500, Service Manual

Page: 403 / 623

Adjustments and Calibrations 6-9
Resetting Fuser Life
This procedure restarts the counter that tracks Fuser life. Perform this procedure after
you install a new Maintenance Kit.
Note
Resetting the Fuser Life counter also resets the Transfer Roller counter and all
Tray Page counters to zero.
To reset the Fuser:
1.
From the Main menu, select
Information
, then press the OK button.
2.
Select
Supplies Info
, then press the OK button.
3.
Select
Reset Fuser Life
, then press the OK button.
4.
Select
Reset Fuser Life NOW
, then press the OK button to reset the fuser life.
Resetting the Printer to Default Values
You can reset printer values on the following menus to the factory default settings:
■
Connection Setup
■
Paper Handling Setup
■
PostScript Setup
■
PCL Setup
■
General Setup
■ Front Panel Setup
■
Printer Controls
■
File Security (available if the printer has a hard drive)
You can reset all of the Image Processor Board NVRAM-stored parameters to their
factory default values by resetting the PostScript NVRAM. Instructions for resetting
PostScript NVRAM are in "Resetting Printer Default Settings (PostScript NVRAM)"
on page 6-12.
Note
There is no single reset for the Print Engine NVRAM.