Fuji Xerox Phaser 5500, Service Manual

Page: 384 / 623

5-38 Phaser 5500 Printer Service Manual
Residual Image
The image from a previous print appears on the current print.
Initial Actions
■
Inspect the paper path for items, such as staples, paper clips, and paper
scraps.
■
Check the installation of the Drum Cartridge.
■
Check that the Drum Cartridge ground contact points are clean.
■
Verify the paper is within the specifications on the Paper Tips Page.
Residual Image Troubleshooting Reference
Applicable Parts Example Print
■
Fuser
■
Engine Logic Board
■
Image Processor Board.
■
HVPS
Residual Image Troubleshooting Procedure
Step Actions and Questions Yes No
1
Check image quality.
Is the customer printing the same
image in large quantity? Go to Step 2. Go to Step 3.
2 Print 30 Test Prints.
Does the residual image appear? Go to Step 3. Print 30 customer
prints and go to Step 3.
3
Check paper condition.
1. Load new, dry paper.
2. Print 30 Test Prints.
Does the problem still occur?
Go to Step 4. Problem solved.
s5500-068