320
Maintenance and troubleshooting
Type 8098 FLOWave L
24
MAINTENANCE AND TROUBLESHOOTING
24.1
Safety instructions
Risk of injury due to electrical voltage.
▶
Before carrying out work on the system, disconnect the electrical power for all the conductors and isolate it.
▶
In accordance with standard UL/EN 61010-1, all equipment connected to the Type 8098 FLOWave L
flowmeter shall be double insulated with respect to the mains and all circuits connected to the Type 8098
FLOWave L flowmeter must be limited energy circuits.
▶
Observe all applicable accident protection and safety regulations for electrical equipment.
Risk of injury due to pressure in the installation.
▶
Before any intervention in the installation, stop the circulation of liquid, cut off the pressure and drain the
pipe.
▶
Before any intervention in the installation, make sure there is no pressure in the pipe.
If switched on for a prolonged time, risk of burns or fire due to hot device surfaces
▶
Do not touch with bare hands.
▶
Keep the device away from highly flammable substances and liquids.
Risk of burns due to high liquid temperatures.
▶
Do not touch with bare hands the parts of the device that are in contact with the liquid.
▶
Use safety gloves to handle the device.
▶
Before opening the pipe, stop the circulation of liquid and drain the pipe.
▶
Before opening the pipe, make sure the pipe is completely empty.
Risk of injury due to the nature of the liquid.
▶
Respect the prevailing regulations on accident prevention and safety relating to the use of dangerous
liquids.
WARNING
Risk of injury due to non-conforming maintenance.
▶
Maintenance must only be carried out by qualified and skilled staff with the appropriate tools.
▶
Ensure that the restart of the installation is controlled after any interventions.
CAUTION
Risk of injury due to a heavy device.
A heavy device can fall down during transport or during installation and cause injuries.
▶
Transport, install and dismantle a heavy device with the help of another person.
▶
Use appropriate tools.
English
Summary of Contents for Flowave 8098
