Burkert Flowave 8098, Operating Instructions Manual

Page: 67 / 354

67
Electrical installation
Type 8098 FLOWave L
8.14 Wiring output 1 (analogue) and output 3 configured
as an analogue output (device variant with cable
glands)
NOTICE
Risk of short-circuit if the configuration of output 3 is wrong.
▶
Before wiring output 3 as an analogue output, make sure output 3 is configured as an analogue output
in the Parameter menu of the outputs. See chapter 18.2 Changing the type of output 3 .
An analogue output can be wired either in sourcing mode or in sinking mode.
1 1 2 3 4 5 6 7 8 9 1 1 2 1 0
+ - + -
12-35 V DC
+ -
12-35 V DC
+ -
4...20 mA input, at
external instrument,
connected to output 3
Power supply for
output 3
Power supply for
output 1
4...20 mA input, at
external instrument,
connected to output 1
Fig. 33: Wiring the analogue outputs
English