Burkert Flowave 8098, Operating Instructions Manual

Page: 232 / 354

232
SAW sensor – Parameter
Type 8098 FLOWave L
15.13.8 Deactivating the monitoring of the acoustic transmission factor
By default, the acoustic transmission factor values are not monitored.
But if the monitoring of the acoustic transmission factor is active, do the following to deactivate it:
→
Go to the
CONFIGURATION
view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Add. meas. values
→
Acoustic transmission factor
→
Limits
→
Active No .
→
Save.
The monitoring of the acoustic transmission factor is inactive.
15.13.9 Resetting the default values of the error limits, the warning limits
and the hysteresis of the acoustic transmission factor
The default values of the error limits, the warning limits and the hysteresis of the acoustic transmission
factor are the following:
•
high error value: 195 %,
• low error value: 5 %,
• high warning value: 190 %,
• low warning value: 10 %,
• value of the hysteresis: 1 %.
To reset the default values of the error limits, the warning limits and the hysteresis of the acoustic trans-
mission factor, do the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Add. meas. values
→
Acoustic transmission factor
→
Limits
→
Reset to default Confirm.
The limit values and the hysteresis value are reset.
→
Go back to the parent menu.
English