Burkert Flowave 8098, Operating Instructions Manual

Page: 85 / 354

85
How to do the settings
Type 8098 FLOWave L
Table 21 shows the symbol displayed in the information bar, depending on the user level that is active on
the device, and what can be done with each type of user level.
Table 21: Possible login user levels
Symbol
1)
User level Description
No symbol
Basic user
• No password is required.
• The menu items with the symbol enable read-only access.
• Not all the menu items that are available with a higher user level are
displayed.
Advanced
user
• Password required, if the password protection is active (see chapter 12.15 ).
Default password is 005678.
• The menu items with the symbol enable read-only access.
• Not all the menu items that are available with a higher user level are
displayed.
Installer
• Password required, if the password protection is active (see chapter 12.15 ).
Default password is 001946.
• This level is active by default (and by default, password protection is
switched off).
• All the available menu items can be adjusted.
Bürkert
• Password required, if the password protection is active (see chapter 12.15 ).
• Only for Bürkert service.
1)
displayed in the information bar, only if the adjustment is protected through passwords.
→
If you have forgotten your passwords, you can restore the default passwords with the Type 8920 Bürkert
Communicator software. Refer to the related Operating Instructions.
10.6 Default settings
You can find the default settings of the device in the CANopen supplement for the Type 8098 FLOWave L at
country.burkert.com .
→
Before making any changes to the settings, use the Bürkert Communicator software to print a pdf file
with all the default settings of the device.
English