Burkert Flowave 8098, Operating Instructions Manual

Page: 347 / 354

347
Maintenance and troubleshooting
Type 8098 FLOWave L
24.13.6 Message "Initialization of industrial communication"
Message
Initialization of industrial communication
Symbol displayed in the
information bar
Possible cause
The device is initializing the industrial communication. The message is dis-
played at each device start.
What to do?
→
Wait until the initialization is finished.
→
If the message is not automatically removed, make sure the industrial
communication settings are correct at the device and at the PLC (e.g. IP
address).
24.13.7 Message "Fieldbus master is running in stop mode"
Message
Fieldbus master is running in stop mode
Symbol displayed in the
information bar
Possible cause
The Ethernet connection is established with the client (e.g. PLC) but the PLC
is in stop mode.
No cyclic data can be sent to the PLC.
What to do?
→
To send cyclic data to the PLC, start the PLC in RUN mode.
English