Burkert Flowave 8098, Operating Instructions Manual

Page: 301 / 354

301
Outputs – Maintenance
Type 8098 FLOWave L
→
Test
→
Enter the current value to be tested The device generates the entered current value on
the chosen analogue output.
→
To test another value or To quit the test.
20.3 Resetting the calibration data of an analogue output
to its default values
To reset the calibration data of an analogue output to its default values, do the following:
→
Go to the CONFIGURATION view.
→
Outputs
→
Confirm to access the Parameter view.
→
Go to the MAINTENANCE view.
→
Output 1: analog or Output 3: analog
→
Reset to default
→
To reset the calibration data of an analogue output to its default values.
→
The calibration data of an analogue output is reset to its default values.
→
To acknowledge the displayed message.
20.4 Resetting the calibration data of all the analogue
outputs to its default values
To reset the calibration data of all the analogue outputs to its default values, do the following:
→
Go to the
CONFIGURATION
view.
→
Outputs
→
Confirm to access the Parameter view.
→
Go to the MAINTENANCE view.
→
Reset to default
→
To reset the calibration data of all the analogue outputs to its default values.
→
The calibration data of all the analogue outputs is reset to its default values.
→
To acknowledge the displayed message.
English