Burkert Flowave 8098, Operating Instructions Manual

Page: 209 / 354

209
SAW sensor – Parameter
Type 8098 FLOWave L
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Stand. meas. values
→
Mass totalizer 1 or Mass totalizer 2
→
Value name
.
→
Enter the name by selecting and confirming each character. The name can have up to 19
characters.
→
OK
→
Save the name.
The name is changed.
15.11.2 Choosing the counting direction of each mass totalizer
By default, the counting direction of both mass totalizers is Positive only .
The possible counting directions are:
•
Positive only : the mass totalizer counts the mass of liquid that flows in the direction defined as positive,
i.e. in the same direction as the arrow located on the front of the device.
•
Negative only
: the mass totalizer counts the mass of liquid that flows in the direction defined as negative,
i.e. in the direction opposite to the direction of the arrow located on the front of the device.
• Both : the mass totalizer counts the mass of liquid that flows in the direction defined as positive but
deducts the mass of liquid that flows in the direction defined as negative.
To change the counting direction of each mass totalizer, do the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Stand. meas. values
→
Mass totalizer 1 or Mass totalizer 2
→
Counting direction
.
→
Choose a counting direction.
→
Save.
The counting direction is changed.
English