Burkert Flowave 8098, Operating Instructions Manual

Page: 180 / 354

180
SAW sensor – Parameter
Type 8098 FLOWave L
15.7 Setting the parameters of the liquid concentration
15.7.1 Giving a user defined name to the measured liquid
concentration
The name is used to identify the process value in the user defined views and in all the menus where the
process value is displayed (for example in the Outputs menu).
By default, the names associated to the measured liquid concentration are Concentration 1 and
Concentration 2 .
To add a user defined name to the default name, do the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Add. meas. values
→
Concentration 1
or
Concentration 2
→
Value name .
→
Enter the name by selecting and confirming each character. The name can have up to 19
characters.
→
OK
→
Save the name.
The name is changed.
15.7.2 Selecting the liquid concentration type
To select the liquid concentration type, do the following:
→
Go to the
CONFIGURATION
view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Add. meas. values
→
Concentration 1 or Concentration 2
→
Concentration law The Current settings (liquid and unit) are displayed.
→
Choose the expected concentration law into the choice given by the device.
→
Choose the expected unit into the choice given by the device.
The New settings are displayed.
→
Acknowledge the message to go back to the parent menu.
English