Burkert Flowave 8098, Operating Instructions Manual

Page: 121 / 354

121
General settings – Parameter
Type 8098 FLOWave L
• On request, the configuration provider replaces the configuration data on the memory card with the
current configuration data of the equipped modules. See chapter 12.12.2. For example, this is useful to
remove from the configuration memory, the configuration data of a removed module.
• On request, the configuration provider transfers the configuration data of all the modules from the con -
figuration memory to the device. The modules with the same article numbers must have the same serial
numbers. Refer to chapter 12.12.3 .
Configuration
memory
Fig. 50: Location of the configuration memory (SIM card)
12.12.1 Reading out the status of the configuration provider
Do the following:
→
Go to the
CONFIGURATION
view.
→
General settings
→
Confirm to access the Parameter view.
→
Configuration provider
→
Status
→
Go back to the parent menu.
English