Burkert Flowave 8098, Operating Instructions Manual

Page: 111 / 354

111
General settings – Parameter
Type 8098 FLOWave L
12.5.3 Entering a description for the device
The description allows you to precisely identify this device. To enter a description for the device, do the
following:.
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the Parameter view.
→
büS
→
Description
→
Enter the description (max. 19 characters) by selecting and confirming each character.
→
OK
→
Save the description.
The description is set.
12.6 Setting the advanced parameters for identifying the
device connected to büS or to a CANopen bus
12.6.1 Entering a unique name for the device
• Only change the
Unique device name
of a device if 2 devices with the same name are connected
to büS or to a CANopen bus.
• If the Unique device name of the device is changed, the participants on büS or to a CANopen bus
lose the link to the device. The link between the participants must then be restored.
The Unique device name of the device is used by the participants connected to büS or to a CANopen bus.
To change the Unique device name , do the following:
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the Parameter view.
→
büS
→
Advanced
→
Unique device name
→
Enter the name by selecting and confirming each character.
English