Burkert Flowave 8098, Operating Instructions Manual

Page: 335 / 354

335
Maintenance and troubleshooting
Type 8098 FLOWave L
24.11.4 Message "Temperature too low"
Message Temperature too low
Symbol displayed in the
information bar
Possible cause
The value of the liquid temperature is lower than the permitted minimum
error value set in chapter 15.6.7 Changing the error limits, the warning limits
and the hysteresis of the liquid temperature.
What to do? As soon as the value of the liquid temperature returns to within the per-
mitted range, the error is automatically reset.
Message Temperature too low
Symbol displayed in the
information bar
Possible cause
The value of the liquid temperature is lower than the permitted minimum
warning value set in chapter 15.6.7 Changing the error limits, the warning
limits and the hysteresis of the liquid temperature.
What to do? As soon as the value of the liquid temperature returns to within the per-
mitted range, the warning is automatically reset.
24.11.5 Message "Value totalizer 1 too high" / "Value totalizer 2 too high"
or "Value mass totalizer 1 too high" / "Value mass totalizer 2
too high"
Message Value totalizer 1 too high / Value totalizer 2 too high
or
Value mass totalizer 1 too high / Value mass totalizer 2 too high
Symbol displayed in the
information bar
Possible cause
The value of the totalizer / mass totalizer is higher than the permitted
maximum error value set in chapter 15.10.5 Changing the error limits, the
warning limits and the hysteresis of each volume totalizer.
What to do? As soon as the value of the totalizer / mass totalizer returns to within the
permitted range, the error is automatically reset.
Message Value totalizer 1 too high / Value totalizer 2 too high
or
Value mass totalizer 1 too high / Value mass totalizer 2 too high
Symbol displayed in the
information bar
Possible cause
The value of the totalizer / mass totalizer is higher than the permitted
maximum warning value set in chapter 15.10.5 Changing the error limits, the
warning limits and the hysteresis of each volume totalizer.
What to do? As soon as the value of the totalizer / mass totalizer returns to within the
permitted range, the warning is automatically reset.
English