Burkert Flowave 8098, Operating Instructions Manual

Page: 184 / 354

184
SAW sensor – Parameter
Type 8098 FLOWave L
→
Concentration 1 or Concentration 2
→
Limits
→
Active
→
Yes
.
→
Save.
The monitoring of the liquid concentration is active and the device status will change depending on the
limits that have been set.
→
You can configure the behaviour of an analogue output depending on the status of the device. See
chapter 18.3.3 .
→
You can configure a digital output to switch every time a specific event is generated. See chapter 18.5.1
Configuring a digital output as an on/off output .
→
To enable the monitoring, i.e. to be informed when the value of the liquid concentration is outside the
normal range, enable the diagnostics. See chapter 12.10 Activating the diagnostics function .
15.7.7 Deactivating the monitoring of the liquid concentration
By default, the liquid concentration values are not monitored. If the monitoring of a liquid concentration
value is active, do the following to deactivate it:
→
Go to the
CONFIGURATION
view.
→
SAW sensor
→
Confirm to access the
Parameter
view.
→
Add. meas. values
→
Concentration 1 or Concentration 2
→
Limits
→
Active
→
No
→
Save.
The monitoring of the liquid concentration is inactive.
English