Burkert Flowave 8098, Operating Instructions Manual

Page: 62 / 354

62
Electrical installation
Type 8098 FLOWave L
12. Put the functional earth plate in its original place.
13. Use a size 10 hexagonal key to tighten the 2
screws of the functional earth plate to a torque of
0.2 Nm (0.15 ft·lbf).
2 screws
Functional earth
IT IS NOT MANDATORY TO
CONNECT THE DEVICE TO A
PROTECTIVE EARTH – MEANT
FOR FUTURE USE
14. Put each conductor in the correct terminal of the terminal strip.
15. To connect the 12...35 V DC power supply through the cable glands, refer to chapter 8.13 .
16. To connect the outputs, refer to chapter 8.14 and chapter 8.15 .
17. Connect the functional earth conductor. See chapter 8.12 .
18. If the display module or the Wi-Fi module is removed, connect it back.
19. Close the front and the top of the transmitter housing.
Fig. 28: Wiring the device through the M20x1.5 cable glands in stainless steel
English