Burkert Flowave 8098, Operating Instructions Manual

Page: 208 / 354

208
SAW sensor – Parameter
Type 8098 FLOWave L
15.10.13 Resetting the overflow counter of each volume totalizer
If a volume totalizer reaches its maximum value, the associated overflow counter value is incremented by 1.
To reset the overflow counter associated to each volume totalizer, do the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the
Parameter
view.
→
Stand. meas. values
→
Totalizer 1 or Totalizer 2
→
Reset overflow counter
→
Confirm.
The overflow counter associated to the volume totalizer is reset.
15.10.14 Resetting all the parameters of each volume totalizer to their
default values
To reset all the parameters of each volume totalizer to their default values, do the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the
Parameter
view.
→
Stand. meas. values
→
Totalizer 1 or Totalizer 2
→
Reset to default Confirm.
All the parameters of each volume totalizer are reset to their default values.
→
Go back to the parent menu.
15.11 Setting the parameters of the mass totalizers
15.11.1 Giving a user defined name to each mass totalizer
The name is used to identify the process value in the user defined views and in all the menus where the
process value is displayed (for example in the Outputs menu).
By default, the names associated to the mass totalizers are Mass totalizer 1 and Mass totalizer 2 .
To add a user defined name to the default name of a mass totalizer, do the following:
English