Burkert Flowave 8098, Operating Instructions Manual

Page: 40 / 354

40
Installation in the pipe
Type 8098 FLOWave L
Fig. 13: Possible positions of the transmitter SE98
→
To change the position of the transmitter, do the following:
For safety reasons and to comply with standard
UL 61010-1, the blind cover and the display module
or the Wi-Fi module are locked.
→
Prepare the unlocking magnetic key, which is
delivered with the device, to change the position
of the transmitter.
The blind cover or the display module or
the Wi-Fi module is locked
1. Put the magnetic key on the mark related
to the display module. You should hear a soft
click indicating that the display module or the
Wi-Fi module is unlocked. Do not use a tool to
turn the display module.
2. While the magnetic key is on the mark,
turn the display module or the Wi-Fi module
by hand only from the locked position to the
unlocked position. If you cannot turn the display
module or the Wi-Fi module by hand, contact
Bürkert.
The blind cover, the display module or
the Wi-Fi module is unlocked
English