Burkert Flowave 8098, Operating Instructions Manual

Page: 185 / 354

185
SAW sensor – Parameter
Type 8098 FLOWave L
15.7.8 Changing the error limits, the warning limits and the hysteresis
of the liquid concentration
To change the error limits, the warning limits and the hysteresis of liquid concentration 1 or liquid concen -
tration 2, do the following:
→
Go to the
CONFIGURATION
view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Add. meas. values
→
Concentration 1 or Concentration 2
→
Limits
→
Settings
The
Current settings
are displayed
→
Set the high error limit
→
Set the low error limit
→
Set the high warning limit
→
Set the low warning limit
→
Set the hysteresis value The
New settings
are displayed.
→
Save.
The limit values and the hysteresis value are changed.
English