Burkert Flowave 8098, Operating Instructions Manual

Page: 199 / 354

199
SAW sensor – Parameter
Type 8098 FLOWave L
15.9.7 Changing the error limits, the warning limits and the hysteresis
of the liquid density
To change the error limits, the warning limits and the hysteresis of the liquid density, do the following:
→
Go to the
CONFIGURATION
view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Stand. meas. values Density
→
Limits
→
Settings The Current settings are displayed
→
Set the high error limit
→
Set the low error limit
→
Set the high warning limit
→
Set the low warning limit
→
Set the hysteresis value The New settings are displayed.
→
Save.
The limit values and the hysteresis value are changed.
15.9.8 Resetting the default values of the error limits, the warning
limits and the hysteresis of the liquid density
The default values of the error limits, the warning limits and the hysteresis of the liquid density are the
following:
•
high error value: 2.0 g/cm
3
,
• low error value: 0.5 g/cm
3
,
• high warning value: 1.6 g/cm
3
,
• low warning value: 0.6 g/cm
3
,
• value of the hysteresis: 0 g/cm
3
.
To reset the default values of the error limits, the warning limits and the hysteresis of the liquid density, do
the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
English