Burkert Flowave 8098, Operating Instructions Manual

Page: 14 / 354

14
Description
Type 8098 FLOWave L
5 DESCRIPTION
5.1 Device variants
The Type 8098 FLOWave L flowmeter is made up of a Type SE98 transmitter and a Type S097 flow sensor.
The following pictures describe the main device variants of the Type 8098 FLOWave L flowmeter:
• Fig. 1 describes a device with two M20x1.5 cable glands in stainless steel (or in nickel plated brass) and
one 5-pin M12 male connector.
• Fig. 2 describes the Ethernet device variant, i.e. a device with two 4-pin M12 female connectors and one
5-pin M12 male connector.
or display module (Type ME31)
Device status indicator, seal
Transmitter housing, including
the electronic modules
Type SE98
transmitter
Type S097 flow
sensor
M20x1.5 cable glands in nickel
plated brass, with blind plugs
5-pin M12 male connector, with
screwed plug
Sensor measurement tube
Seal
Type 8098 FL
OW
ave L flowmet
er
Sensor housing
Seal
Blind cover
Pressure compensating
element
Blind cover
Process connection
1)
Functional earth
or M20x1.5 cable glands in
stainless steel, with blind plugs
2)
The process connections can be either clamp connections, flange connections or external-threaded connections.
Fig. 1: Description of the device variants with two M20x1.5 cable glands and one 5-pin M12 male connector
English