Burkert Flowave 8098, Operating Instructions Manual

Page: 334 / 354

334
Maintenance and troubleshooting
Type 8098 FLOWave L
24.11.2 Message "Flow rate too low"
Message Flow rate too low
Symbol displayed in the
information bar
Possible cause
The flow rate value is lower than the permitted minimum error value set in
chapter 15.4.7 Changing the error limits, the warning limits and the hys -
teresis of the volume flow rate
What to do? As soon as the flow rate returns to within the permitted range, the error is
automatically reset.
Message Flow rate too low
Symbol displayed in the
information bar
Possible cause
The flow rate value is lower than the permitted minimum warning value set
in chapter 15.4.7 Changing the error limits, the warning limits and the hys -
teresis of the volume flow rate
What to do? As soon as the flow rate returns to within the permitted range, the warning is
automatically reset.
24.11.3 Message "Temperature too high"
Message Temperature too high
Symbol displayed in the
information bar
Possible cause
The value of the liquid temperature is higher than the permitted maximum
error value set in chapter 15.6.7 Changing the error limits, the warning limits
and the hysteresis of the liquid temperature.
What to do? As soon as the flow rate returns to within the permitted range, the error is
automatically reset.
Message Temperature too high
Symbol displayed in the
information bar
Possible cause
The value of the liquid temperature is higher than the permitted maximum
warning value set in chapter 15.6.7 Changing the error limits, the warning
limits and the hysteresis of the liquid temperature.
What to do?
As soon as the flow rate returns to within the permitted range, the warning is
automatically reset.
English