Burkert Flowave 8098, Operating Instructions Manual

Page: 60 / 354

60
Electrical installation
Type 8098 FLOWave L
Procedure to open the front of the transmitter if the display module
or the Wi-Fi module
is on the front of
the device
1. Remove the blind cover from the top of the
transmitter.
2. Put the magnetic key on the mark related
to the display module or the Wi-Fi module. You
should hear a click indicating that the display
module or the Wi-Fi module is unlocked. Do not
use a tool to turn the display module or the Wi-Fi
module.
3. Turn the display module or the Wi-Fi module by
hand to the unlocked position.
4. Carefully pull the display module or
the Wi-Fi module because a cable connects
the display module or the Wi-Fi module to the
transmitter.
5. Push the tab of the cable connector to dis-
connect the display module or the Wi-Fi module
from the transmitter.
6. Remove the display module or the Wi-Fi module
and put it on a clean surface to protect the seal
from dirt.
Push the tab to
unlock the cable
connector
Fig. 27: Procedure to open the front of the transmitter if the display module or the Wi-Fi module is on the front of
the device
English