Burkert Flowave 8098, Operating Instructions Manual

Page: 143 / 354

143
General settings – Maintenance
Type 8098 FLOWave L
14.3.3 Updating the menu configuration of the device
If the hardware configuration of the device has changed, update the configuration of the menu structure:
• To have access to the menu entries related to the new components.
• To remove the menu entries related to the removed components.
• To avoid that error messages are generated.
For example, if you disconnect the display module because it is not used and you replace it with a blind
cover. In that case, updating of the device menu configuration must be done with the Bürkert Communi -
cator software.
To update the menu configuration of the device, do the following:
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the Parameter view.
→
Go to the
MAINTENANCE
view.
→
Scan device for extensions
If you confirm updating of the menu configuration, the device will restart several times.
→
to update the menu configuration of the device. The device is restarted several times.
The menu configuration of the device is up-to-date.
English