Burkert Flowave 8098, Operating Instructions Manual

Page: 64 / 354

64
Electrical installation
Type 8098 FLOWave L
10. Attach each cable to the functional earth plate.
The shield must be in contact with the functional
earth plate.
11. Put the functional earth plate in its original place.
12. With an hexagonal key size 10, tighten the 2
screws of the functional earth plate to a torque of
0.2 Nm (0.15 ft·lbf).
2 screws
Functional earth
IT IS NOT MANDATORY TO
CONNECT THE DEVICE TO A
PROTECTIVE EARTH – MEANT
FOR FUTURE USE
13. Put each conductor in the correct terminal of the terminal strip.
14. To connect the 12...35 V DC power supply through the cable glands, refer to chapter 8.13 .
15. To connect the outputs, refer to chapter 8.14 and chapter 8.15 .
16. Connect the functional earth conductor. See chapter 8.12 .
17. If the display module or the Wi-Fi module is removed, connect it back.
18. Close the front and the top of the transmitter housing.
Fig. 29: Wiring the device through the M20x1.5 cable glands in nickel plated brass
English