Burkert Flowave 8098, Operating Instructions Manual

Page: 242 / 354

242
SAW sensor – Parameter
Type 8098 FLOWave L
15.15.1 Activating the viscosity compensation for water-like liquids
To activate the viscosity compensation of water-like liquids, do the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Viscosity compensation
→
Settings The current settings are displayed.
→
Confirm
Water
→
Confirm Save.
The viscosity compensation for a water-like liquid is active.
15.15.2 Activating the compensation for a liquid with a constant
viscosity
The kinematic viscosity of a liquid can be constant either because the temperature of the liquid is constant
or because the temperature changes have a very low effect on the viscosity.
To activate the compensation for a liquid with a constant viscosity, do the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the
Parameter
view.
→
Viscosity compensation
→
Settings The current settings are displayed.
→
Confirm.
→
Constant Confirm.
→
Set the value of the liquid viscosity in the displayed units (mm
2
/s). You must enter a pos-
itive value. For example, to set the kinematic viscosity value for oil at 20 °C, i.e. 89 mm
2
/s, enter
8.01.
→
The
New settings
are displayed.
→
Save.
The compensation for a liquid with a constant viscosity is active.
English